Answer

Can I switch business power retailer in NZ while on a fixed-term contract?

Manage My Bills Energy Team7 min read

  • Nationwide

Quick answer

Yes. The Electricity Authority says a fixed-term contract may carry a break fee to switch before the term ends; it does not say you cannot switch, and your old retailer cannot block the registry change. The cost is the early termination clause: read it, weigh the fee against the saving over the months left, and give notice in writing.

Key facts

  • On a fixed term contract there may be a break fee to switch before the fixed term ends, so check your terms and conditions, and ask your power company how the fee applies and whether it can offer a better deal (Electricity Authority).
  • A losing retailer may contact a switching customer about termination fees and fees owed, but may not make a counter-offer unless the customer asks first, for a switch protected period of 180 calendar days (Code cl 11.15AA and 11.15AB).
  • The Code's fee rules, including that fees must be reasonable and cost-based, apply only to a customer defined as a residential consumer; a business relies on its contract and general law (Code, Part 11A).
  • Since 16 August 2022 the Fair Trading Act's unfair contract terms rules cover standard form small trade contracts: trading relationships under $250,000 a year including GST when they first arise (Fair Trading Act ss 26C to 26D).
  • From 1 April 2027 termination fees are banned only for residential consumers changing plans with the same retailer; its 2 November 2026 guidance says a fee for moving to a different retailer may still apply (Electricity Authority).

Yes. As at 9 November 2026, the Electricity Authority's advice to anyone on a fixed-term contract is that "there may be a break fee to switch before the fixed term ends so check your terms and conditions", not that the switch is off the table. The decision is commercial: what the early termination clause costs against what a new agreement saves over the months left.

What does a fixed-term business power contract lock in?

A fixed term fixes a price, or a price formula, and a period. Which charges a fixed price actually locks in covers the first. The period is what matters here, because the contract says what happens if you leave early. Part 11A of the Code defines a "fee" as an amount a retailer charges "other than a rate which constitutes a pricing plan", and says in terms that it "includes a break fee for a fixed term contract". Early termination fee, break fee and exit fee are the same thing under different headings.

Two things a fixed term never locks: the lines company and the ICP. Both are fixed by the premises, which is why a switch is a registry entry and does not interrupt supply.

How do I find my end date and the exit terms?

Your supply agreement or sign-up confirmation is the only document that answers this. Find five items before you ask anyone for a price:

FindUsually headedWhy it matters
Start date and termTerm, initial period, supply periodMonths left multiplies everything below
Early termination clauseEarly termination, break feeA fixed sum, a sum per month left, or a formula on usage; per ICP or per agreement
Notice clauseTermination, noticeHow many days, and whether in writing
Renewal clauseExpiry, rollover, automatic renewalWhether you are already inside a new term
Price variation and pass-throughPrice changes, change in law, network chargesWhether a mid-term price rise let you leave without the fee

The Authority's November 2026 retailer guidance says that from 1 April 2027 "Any contract end date and any exit fee must be included on every invoice", but that duty is owed to Part 11A's residential customer, so a business bill may never show either.

If you cannot find the agreement, ask the retailer in writing for a copy and your end date, and for your usage at the same time: under clause 11.32B of the Code a retailer must give a consumer the consumption information it holds for the last 24 months no later than 5 business days after the request, and must not charge a fee for responding. How to read a business power bill shows where the ICP and the rates sit on the invoice.

What can the early termination fee be, and is it worth paying?

Only your clause can say, and a business has fewer guardrails than a household. Schedule 11A.1 of the Code requires that a fee "not exceed reasonable estimates of the costs the fee is identified as contributing to", that a fee set by "a method or calculation" must "where practicable include a stated maximum limit", and that a retailer charge a fee only where it is "reasonably satisfied" that "the customer is aware of the amount of the fee". But Part 11A defines "customer" as "a residential consumer who has entered into a contract with a retailer", so none of it binds a commercial agreement.

At the household end, the Authority's March 2026 billing decision discusses "a $150 early termination fee to exit a fixed-term electricity contract", and a sign-up credit clawed back pro rata: "$100 of the $200 discount where the customer terminates the 12-month contract after only six months". A commercial clause is not held to that scale. Nor does that decision's ban on break fees help a business. It says: "This prohibition applies only to residential consumers when switching between plans with the same retailer. Termination fees may still apply when a customer switches to a different retailer." And it is not in force yet: written to start on 30 October 2026, the amendment was deferred on 18 August 2026 and the Authority's Code page gives 1 April 2027. Its retailer guidance of 2 November 2026 puts it plainly: "This prohibition does not relate to fees that may apply where a customer switches to a different retailer." So as at 9 November 2026 Part 11A reads on a business break fee exactly as it did.

The arithmetic is then short:

  1. Months left, multiplied by the monthly saving the new offer gives on your own usage, is the gain from switching now.
  2. Set against it the fee, plus any sign-up credit the clause claws back.
  3. If the fee wins, diary the end date and the last day to give notice, and compare again about three months out, the timing the renewal checklist works to.

The Authority adds one step: "If there's a break fee, talk to your power company about how that fee applies and if they can offer you a better deal." Asking does not start a switch.

Can my current retailer block the switch or talk me out of it?

It cannot block it. Under Schedule 11.3 the new retailer advises the registry manager no later than 2 business days after your arrangement comes into effect (3 for a half-hour metered site); the old retailer then has 3 business days from the registry notice to "provide the registry manager with a valid switch response code" or request a withdrawal, and a withdrawal request "must not become effective until accepted by the trader who received the withdrawal". The fee is collected through your final bill; it is not a step in the switch.

The saves and win-backs rules limit what the old retailer may say. Since 31 March 2020, clause 11.15AA has said a losing retailer "must not, by any means, including by using a third party or agent acting on its behalf", contact a switching customer "to attempt to persuade the customer to terminate the arrangement with the gaining retailer", including by a counter-offer or an enticement. The Authority's November 2024 guidelines put the switch protection period at "180 days (calendar not business days)".

Clause 11.15AB lists what it may still do: advise you "of any termination fees that the customer is required to pay", contact you about fees owed, the final meter reading and the effect on other contracts, "for example, for the supply of gas"; answer a factual question; and make a counter-offer only where you "contacted the losing retailer without the losing retailer having first prompted the customer to do so". The guidelines add that these contacts must not be used "to initiate offers to supply electricity during switch protected periods".

Which laws do cover a business power contract?

Two, and neither sets the fee.

The Fair Trading Act's unfair contract terms rules. Since 16 August 2022 they apply to standard form "small trade contracts": contracts between parties in trade that are not consumer contracts and do not form part of a trading relationship exceeding the annual value threshold, which section 26D sets at $250,000 including GST in any annual period, measured when the relationship first arises. Section 46M's examples of terms that may be unfair include one that "penalises, or has the effect of penalising, one party (but not another party) for a breach or termination of the contract" and one that lets one party "renew or not renew the contract". Two limits: a term that "sets the upfront price" cannot be declared unfair under section 46K, and "Only the Commerce Commission can take action to stop a business using an unfair term in a small trade contract". A business can report the term; it cannot void the fee itself.

The Energy Complaints Scheme. Utilities Disputes' rules define a consumer as "any person who is supplied, or applies to be supplied, with electricity or gas other than for resupply", which includes a business, and all energy retailers and distributors "are required to be members". The scheme will not accept a complaint "if it is about the price a Provider chooses to set for their goods or services", but it "may consider whether appropriate information about charges has been made available to the Complainant and whether charges for services have been correctly applied". That is the break-fee dispute that can succeed: not "the fee is too high" but "I was never told the amount" or "it was calculated wrongly".

What should a business do before giving notice?

  1. Write down four dates: start, end, last day to give notice, and any rollover date.
  2. Work the fee out yourself from the clause, including any sign-up credit it claws back and whether it is charged per ICP.
  3. Get your usage from the retailer under clause 11.32B, so the new offer is priced on real data.
  4. Compare on the same ICP and usage, and net the fee off the first year's saving.
  5. Give notice in writing, in the form the clause requires, and keep the acknowledgement.
  6. Check the final bill against the switch-date meter reading before paying it.

If the agreement is unclear, or several sites have different end dates, the Letter of Authority route lets Manage My Bills request the terms and usage data from your retailer, as the Code lets an authorised agent do under clause 11.32B. If the contract is clear, the savings calculator starts from your address or ICP, and business electricity explains how a comparison runs. More business power answers cover what comes next.

Questions people also ask

Can my old retailer refuse to release my business until the break fee is paid?

No. The Code's standard switch has no step where the losing retailer approves the move or confirms a fee is paid: within 3 business days of the registry notice it must give a valid switch response code or request a withdrawal, and under Schedule 11.3 a withdrawal request must not become effective until accepted by the trader who received it. The fee is a debt collected through your final bill, not a condition of the switch.

Does the break fee still apply if I sell the business or move premises?

Only your contract can say. Read the early termination clause for what counts as termination and whether an assignment or a change of occupier is treated differently, and read the notice clause for how to tell the retailer. The ICP stays with the premises, so a new occupier signs with a retailer for that connection separately.

Can I switch some of my sites and keep the others on the contract?

Only if the agreement allows a site to be removed; check whether the fee is set per ICP or for the whole agreement. The Code's switch process runs per ICP, and the Electricity Authority's win-back guidance says the saves rules follow customers rather than ICPs: a retailer that keeps some of your sites may contact you about them, but must not use that contact to make offers for the sites that switched away.

Can I take a break fee dispute to Utilities Disputes?

Yes, a business can. The Energy Complaints Scheme's rules define a consumer as any person supplied with electricity or gas other than for resupply, and all retailers must be members. It will not consider a complaint that is only about the price a provider sets, but it may consider whether appropriate information about charges was made available to you and whether charges were correctly applied. The service is free and complaints must be brought within six years.

How long does the switch take once I have signed with the new retailer?

The Electricity Authority says that on average it takes just 3 to 4 days for the switch to take place. Under Schedule 11.3 the new retailer advises the registry no later than 2 business days after your arrangement comes into effect (3 for a half-hour metered site), the old retailer responds within 3 business days of the registry notice, and the switch closes with a meter reading as at the switch date.

Does a fixed-term business gas contract work the same way?

The same logic, with a different registry. Gas Industry Co says switches between retailers usually take a maximum of 10 business days to show on the registry from the time the requesting retailer initiates the switch. There is no gas equivalent of the Code's fee rules for a business, and the Retail Gas Contracts Oversight Scheme is voluntary, so the exit clause in your agreement is the whole answer.

Sources

Primary sources first. Every figure on this page comes from one of these, each with the date we last accessed it.

  1. Compare and switch to save $ (opens in a new tab)Electricity Authority · accessed 9 November 2026
  2. Electricity Industry Participation Code 2010, Part 11: Registry information management (30 October 2026) (opens in a new tab)Electricity Authority · accessed 9 November 2026
  3. Guidelines on saves and win-backs (14 November 2024) (opens in a new tab)Electricity Authority · accessed 9 November 2026
  4. Saves and win-backs (opens in a new tab)Electricity Authority · accessed 9 November 2026
  5. Electricity Industry Participation Code 2010, Part 11A: Consumer Care Obligations (30 October 2026) (opens in a new tab)Electricity Authority · accessed 9 November 2026
  6. Improving electricity billing in New Zealand: Final decision (3 March 2026) (opens in a new tab)Electricity Authority · accessed 9 November 2026
  7. Billing reforms introduced from 30 October (13 August 2026) (opens in a new tab)Electricity Authority · accessed 9 November 2026
  8. Improving electricity billing amendment (made 18 August 2026) (opens in a new tab)Electricity Authority · accessed 9 November 2026
  9. Improving electricity billing (opens in a new tab)Electricity Authority · accessed 9 November 2026
  10. Electricity Authority releases updated improved billing guidance (3 November 2026) (opens in a new tab)Electricity Authority · accessed 9 November 2026
  11. Improving electricity billing guidance: Retailer guidance, version 3.0 (2 November 2026) (opens in a new tab)Electricity Authority · accessed 9 November 2026
  12. Fair Trading Act 1986 (version as at 1 July 2026), sections 26C, 26D and 46K to 46M (opens in a new tab)New Zealand Legislation · accessed 9 November 2026
  13. Unfair contract terms (opens in a new tab)Commerce Commission · accessed 9 November 2026
  14. Unfair Contract Terms Guidelines (updated August 2022) (opens in a new tab)Commerce Commission · accessed 9 November 2026
  15. Can we look into your complaint? (opens in a new tab)Utilities Disputes · accessed 9 November 2026
  16. The General and Scheme rules for the Energy Complaints Scheme (effective 1 April 2019) (opens in a new tab)Utilities Disputes · accessed 9 November 2026
  17. Energy Complaints Scheme (opens in a new tab)Utilities Disputes · accessed 9 November 2026
  18. Utilities Disputes (opens in a new tab)Utilities Disputes · accessed 9 November 2026
  19. Search for your gas connection (opens in a new tab)Gas Industry Co · accessed 9 November 2026
  20. Compare prices and contracts (opens in a new tab)Gas Industry Co · accessed 9 November 2026

Written by the Manage My Bills Energy Team. First published .

Manage My Bills compares commercial electricity, gas, fibre, water and waste for businesses nationwide, from our office in Manukau, Auckland.

Your connection, your numbers

How much could you save?

Enter your business address or ICP number, roughly what you use and roughly what you pay, and see what your connection could cost — in about two minutes.

  • About two minutes
  • Address or ICP — no bill upload
  • Commercial connections, nationwide

Talk to a specialist

Prefer a call back?

Leave a name and a number

We ring back within one working day. Open Mon–Fri 8am–8pm.

Or call us now on 0508 692 455 · Privacy policy (opens in a new tab)

Keep reading